🛠️ Tutorial: Creating ethnic bohemian multi-charm earrings

Tools needed: Jewelry glue (e.g., Hasulith), round-nose pliers, flat-nose pliers, and wire cutters.

Step 1: Preparing the base

Apply a small drop of glue to the multi-connector pendant tray (AC419). Carefully place the green Onyx cabochons (YE1785) onto it. Let dry for at least 1 hour for optimal hold.

Step 2: Creating the pearl charms

Thread a freshwater pearl (FWP140) onto a flat-head pin (AC72). Using your round-nose pliers, form a loop above the pearl. Cut off the excess wire if necessary. Repeat the process for the desired number of pearl charms.

The amethyst charms are sold mounted on a pin.

Step 3: Placing the charms

Open the charm rings (the pearl ones or the amethyst ones - BRE779) and attach them to the multi-connector pendant - AC419.

Step 4: Assembling the structure

1. Open a jump ring (AC288).

2. Attach the smooth ring (AC246) or the textured ring (GOF73) to the AC419 multi-connector.

3. Attach this assembly to the small loop at the bottom of your earring hook (AC119). Close the ring firmly.

📊 Quantity Table (For 1 pair)